Showing posts with label wardrobe refashion. Show all posts
Showing posts with label wardrobe refashion. Show all posts

Thursday, December 1, 2016

Dollar Doll Clothes--One More Time!




Two more dolly projects from undies--my favorites so far!

There was juuuust enough fabric in the pink print pair from my K-Mart find to squeeze out a PJ t-top as well as the pants.  I used my 'Leggings' pattern here.  So comfy!


And camo pants!  Care found a three-pack of boys briefs on clearance for source fabric, and this particular print proved too large to use for the smaller dolls. Perfect for 
Felicity, though!

Love this t-shirt pattern, which closes in the back with Velcro.  Read about it here. 

My Dollar Doll Clothes inspiration seems fulfilled for now, and this little wardrobe is off to the church service auction tonight to find a happy new home for Christmas.

Still have a bit of source fabric for next time, though...


Monday, April 30, 2012

Miniatures Monday--Little Swimsuit

Warm weather is here, and C-K's doll, Abby, was in need of a swimsuit.  Luckily there were some cute candidates for a restyle at the dollar store--in the infant section!


I'm sad to say I have forgotten to take a before picture--again. Sorry.

I decided the tiny suit would be in the same style as the infant suit--just smaller.  The front neckline is separate, and the back, armholes, and straps are a continuous piece. I started by removing the continuous binding and cutting the front neckline width to fit.  (I always feel bad for the dolls when their cloth body shows, so I made the neckline seam just a bit wide to try and camouflage.  Next time I would make the front neckline a bit narrower for better proportion.)

I was able to pin the suit around the doll to create new cutting lines for the back and upper edge--my disappearing marker was a great help.  I then sketched in new leg openings which are finished with elastic and then turned under.

This was a very fun project--C-K and Abby will be ready for summer!


Wednesday, May 4, 2011

More Onion Bags!




Here's the next incarnation of my Onion Label Market Tote project!



I thought I might try a couple of labels from my onion bag collection with some of my vintage 1970's Levi-Strauss denim remnants, and I think these bags may be among my favorites.

These Levi remnants have indeed been around since the '70's--my dad got them from the factory way back when, used a bunch, and sent the rest home with me a few years ago. I knew I would come up with just the right project for them . . . eventually.

So, it is a true recycle project, fabric and labels both. I did purchase the red webbing handles (how I love them!), and I can assure you that I used a 50% off coupon for the purchase!

The details are still evolving just a bit--still having fun!



Saturday, January 22, 2011

Draft a Twirly Skirt Pattern--It's Easy!



Joy-Joy has been telling me how she admires her sister W-R's fabulous velvety dress--it seems it has the ultimate twirly skirt. So, by special request, I have set out to duplicate the dress in J-J's size. This necessitates creating a pattern for that ultimate twirlyness, so we will draft a simple pattern that creates plenty of fullness and eliminates the bulk of gathers at the top.

First, the fabric--my favorite option being the thrift store, I was lucky enough to find just the item to transform, first try--and only$2.00!

I found a nice-quality velour girls' dress in a larger size, wide enough and long enough to fit my pattern pieces, and I picked apart the seams--only $2.00!

Now for the pattern--this is an easily adapted style, so I have used a basic pattern from my t-shirt pattern collection. ( I keep every size up to size 12 together in a zip-loc bag, size chart included--pajama pants handy in another bag. Let me just say that I found many of these at the thrift store!)

I folded up the lower edge of the bodice pattern to the desired length, plus seam allowance.

Now to draft the twirly skirt--the fullness is all in the flare of the pattern:

l. Make a simple rectangle (above) representing the width of the bodice pattern piece by the desired length of the skirt. Add a seam allowance for the top seam (I'm using 3/8") and the desired hem depth (3/4" here).


2. Slash the skirt pattern lengthwise every inch or so, leaving a tiny 'hinge' at the top edge of each slash--don't worry too much about making even slashes!


3. Spread the slashes apart at the hem edge to create the flare. For my pattern, the original center front edge remains on the fold, and the flare spreads out from there. (If you were to treat the center front as a seam, you could spread out the flare in both directions and really get some twirl-- you would then have four skirt panels.)

Note how the profile of the upper seamline changes as the width of the hemline increases. Spread the slashes evenly to your desired hemline width--you could trace this on another piece of paper for a finished pattern piece if you wish. In this case, front and back will be the same. Pattern complete!


4. The bodice is assembled just like a t-shirt, except that I bound the neckline and made a faced slit at the center back, with a hook and eye closure. To assemble the skirt, stitch the side seams and match the lower bodice seam to the upper skirt seam and stitch--they should be just the same size. I used a straight-stitch, visible hem.

5. Hemming a flared skirt: this can be a little tricky, since the cut edge is significantly wider than the line where it will be stitched. Two thoughts:

--the hem of W-R's dress was finished with a satin stitch, eliminating the problem. It would be easy to give the hem a lettuce edge by stretching slightly as you overcast--best to practice on a scrap first!

--the narrower the hem the better, since a wider hem creates a bigger problem--3/4" deep would be plenty.

--For a stitched hem, pin it up carefully, about every 3". Stitch with the hem edge up and the right side against the feed dogs, easing the hem to the dress by putting a little drag on the bottom layer with your finger as you stitch--this helps the extra fullness work itself in. A little practice helps!

Happy dancing and twirling, girls!


Thursday, December 16, 2010

Felted Sweater Slippers!


I dearly love my annual pajama project for my grandkids, carrying on the family Grandma Christmas Pajama tradition for the third generation. And I seem to have an parallel annual tradition--the one where I tell myself, "This year I'll just have that all finished early and be ready." And then find myself sewing madly in the middle of December.

This week, I'm sewing like crazy. (Family, avert your eyes!)

This year I thought I might change it up a bit--I've been collecting and felting wool thrift-store sweaters for projects, and thought they'd make warm and festive slippers. Martha Stewart Crafts has a great on-line pattern for slippers made of felt, which seemed adaptable (you can make any size pattern by enlarging with a photocopier). I added the cuff.

One big concern: this plan sounds slippery. Thinking of non-slip soles, I found a vinyl upholstery remnant at Hancock's ($6.00 a yard) in a very neutral gray-beige that seems durable and goes with other colors well, and also appeared less slippery than the others. My test pair proved it was a good choice.


Martha's pattern worked very well--I added an insole of felted sweater, basting the it to the vinyl sole right sides together, and the contrast band is stitched to the top of the slipper, right sides together. The seam allowance is then turned down inside and stitched in place.

I feel a tutorial coming up--but not this week!

Tuesday, March 2, 2010

If I Sew It, It Will Come


Spring, that is! I figured I would encourage things along by making a new picnic bag for the warm weather.

I think I mentioned before how I LOVE Jodi Kahn 's book, Simply Sublime Bags. Jodi shows us how to make some fabulous and creative bags, using her innovative and quick low-sew and no-sew techniques. (They involve such things as duct tape, packing tape, Monopoly money, and your stapler--check it out!)

So, here is my take on Jodi's Astroturf picnic bag, using two dollar-store welcome mats, handles scrounged from a $1.00 thrift store purse, and a tablecloth for which I no longer have the table. I had to adapt her pattern a bit to fit the available materials, but at 15" x 23", there's still plenty of room to tote the essentials--$3.00 total!

The flatware that's kept in my vintage picnic basket is just the thing for the pockets, which are made of a scrap from a remnant. (Project here.) Now I'm thinking of an update for the picnic basket, using the rest of my tablecloth. . . hmm. I'll let you know! (Update here.)

Monday, October 12, 2009

Dollar Doll Clothes--from underwear!!

Recognize the source of these cute small-scale prints for doll clothes? Yes, during a recent foray through the neighborhood dollar store we came across some quality women's underwear seconds and naturally asked ourselves what we might make from them. They are the foundation for a fabulous project--Dollar Doll Clothes! Read on for details!

*Fits 18-inch dolls, such as American Girls*


FABRIC CHOICE

l. Choose solids and small prints in nice quality fabric--some lycra content is essential. Either decorative elastic or fabric covered elastic are great for edges and details.
2. Watch for waist and leg elastic that are in scale, for details such as waistbands, straps, and trim.
3. Get the biggest pair possible--more fabric to work with!


INSTRUCTIONS IN BRIEF

l. You'll be cutting pattern pieces complete with elastic. Stretch elastic until the attached fabric is smooth, and pin out to a padded surface, such as your ironing board. Measure piece to be cut, or place pattern, and cut out the needed piece, being sure to snip the elastic LAST for best accuracy.

2. For straps, edges, and trims, carefully snip the elastic from the body of the fabric along its stitching line. Straight stitch or zigzag elastic on the front side of the fabric as desired.


3. As on many small items, it is easiest to finish hems first, then the vertical seams.


Let's get started!
You will need:
> Dollar store women's undies
> Matching thread
> Scraps of lace or trim
>Velcro
>Printed Patterns (see end of post!)


PANTS or SHORTS
or

BIKE SHORTS OR LEGGINGS

l. Cut through seam at crotch of undies so they will lay flat and form a lengthwise fold on your padded surface, aligning elastic edge. Stretch elastic until attached fabric is smooth and pin out into padded surface. Pin on the appropriate pattern piece (patterns at end of post) with the top pattern edge at the top of elastic. Be sure to place the pattern piece on the fold for bike shorts or leggings. Cut out, snipping elastic last. Use shorter cutting line for bike shorts.


2. Stitch back seam right sides together using 1/4" seam allowance and finish edges with zigzag stitch. For pants or shorts, stitch front seam. Fold seam allowances to the side at waistband and stitch down with small stitches to neaten.

3. Fold up 3/8" hem at each lower edge and straight stitch for hems, or zigzag lace scraps to lower edge to finish. (picture)

4. At inseam, match center front to center back seam and stitch from one hem to the other with 1/4" seam. Zigzag to finish seam. You're finished!
SOCKS

l. Make lengthwise fold in fabric, aligning elastic at top. Stretch elastic until the fabric lies flat and pin into padded surface. Place 'socks' pattern (see attachment) with straight edge at top of elastic an pin. Cut out two, snipping elastic last.

2. Fold right sides together on fold line, matching edges of elastic. Stitch curved seam using 1/4" seam allowance. Zigzag to finish.
3. Turn right side out and you're done!


UNDIES

l. Make lengthwise fold in fabric, aligning elastic at top. Stretch elastic until the fabric lies flat nd pin into padded surface. Place 'Undies' pattern piece (see attachment) on fold with waistline at top of elastic and pin. Cut, snipping elastic last.

2. Fold up 1/4" hem at lower edges and straight stitch.

3. Stitch back seam using 1/4" seam allowance, zigzag to finish.

4. Match dot at lower center front edge to lower edge of back seam. Tack front to back at dot. That's it!


HALTER TOP

l. Yes, the halter top is made from the front of a pair of bikinis, leg and waist trim intact. Cut across the narrow part and sides to form a halter top shape.


2. Trim away edging from another area to finish the cut edge.

3. Topstitch edging piece to raw edges, stretching as you sew, to finish raw edge and form fulness. Trim away two lengths of edging from another area for straps. Stitch to upper corners, then turn up and restitch to cover raw edges of elastic.

4. Fit on doll, marking back strap placement. Add a back closure of Velcro and stitch straps to back binding.


CAMISOLE
I'm including a camisole pattern I created.

l. Pin pattern piece on fold and cut out.
2. Edge stitch scraps of lace trim on center front, bottom edge, front and back neck edges, and around armholes.
3. Make straps of two pieces of lace trim zigzagged straight edges together, and cut to the required length. Place ends of straps under top corners of camisole and topstitch. Add a Velcro closure.

Other Thoughts:-Try narrow elastic stretched and straight stitched to the wrong side of the fabric waistline for fulness--cute!
-Try trimmed-off elastic, stretched and topstitched for yoke, or maybe waistband.
-Try trimmed-off elastic used as yoke and straps--the top will still pull over the feet.

Click on the 'Dollar Doll Clothes' label on the right to see some more photos and ideas!

Please have fun with the patterns and share your projects!  How about

#dollardollclothes

on Instagram?

Here's the pattern link:
https://drive.google.com/file/d/0B8tu1-up1AJxTGJoUnVVdmtlQ3c/view?usp=drivesdk&resourcekey=0-4UhFZ9O8YwUBA_680KtFRQ



Underneath it all, I have to admit that this is the most fun I've had for $l.00 in a long time!

Thursday, September 10, 2009

Post #1 at Wardrobe Re:fashion!

See my first post at Wardrobe Re:fashion-