Showing posts with label sewing basics. Show all posts
Showing posts with label sewing basics. Show all posts

Thursday, December 1, 2016

Dollar Doll Clothes--One More Time!




Two more dolly projects from undies--my favorites so far!

There was juuuust enough fabric in the pink print pair from my K-Mart find to squeeze out a PJ t-top as well as the pants.  I used my 'Leggings' pattern here.  So comfy!


And camo pants!  Care found a three-pack of boys briefs on clearance for source fabric, and this particular print proved too large to use for the smaller dolls. Perfect for 
Felicity, though!

Love this t-shirt pattern, which closes in the back with Velcro.  Read about it here. 

My Dollar Doll Clothes inspiration seems fulfilled for now, and this little wardrobe is off to the church service auction tonight to find a happy new home for Christmas.

Still have a bit of source fabric for next time, though...


Friday, December 4, 2009

Dollar Store Santa Dollies--Part 1

If you are a dollar store shopper, you may well recognize these little girls--they seemed to be just the thing for my Sub-for-Santa project this Christmas! I'm making them each two outfits, a blanket, a bib, a diaper, and a diaper bag to carry everything in--my challenge to myself is to make them as inexpensively as possible. but more about that later!


The tiny sleepers are made from some of my granddaughters' outgrown infant sleepers. I had fun following Care's excellent tutorial 'Baby Clothes to Doll Clothes' at ObsessivelyStitching.blogspot.com, found here.

When the jammies were finished, I wondered what I might make with the remaining fabric, and realized the babies needed matching hats--here is how I made them.

We'll do some very simple pattern drafting! You can DO this, it's easy. And just think--you can then casually mention the pattern you drafted! You will need:

-Knit fabric scraps
-Scissors
-Pencil
-Paper
-Ruler
-Measuring tape
-Sewing machine and thread


1. Measure the circumference of the doll's head. Divide this by two, and use this measurement. Draw two parallel lines this distance apart on your paper. (Your ruled, clear quilting ruler would make this easy.) These are the side seams.

2. Draw a curve at one end, slightly shallower than the curve of Dolly's head. This the crown of the hat.

3. Measure from the crown of your doll's head, down her face to her lips. This will be the hem fold line. Measure it out on your pattern from the top of the curve you made, and make a line across. Mark it 'fold line'. (See chart).

4. Now measure the side of the hat ABOVE the fold line to just below the curve--on my pattern this is 2", on yours it will probably be different. The wide hem allows you to turn up the cuff.

5. Mark the cutting line this same distance BELOW the fold line.

6. Mark a 1/4" seam allowance on the edges except the bottom cutting line. Your pattern is complete! Cut it out.

To make the hat:


1. Place two scraps of your knit fabric right sides together. (I'm using leftover sleeves.) Pin on your pattern, making sure the stretch of the fabric goes ACROSS the pattern piece. Cut.


2. Sew around the sides and curve, using your 1/4" seam allowance.

3. Carefully pin up the hem on the fold line you established.


4. Machine stitch the hem close to the cut edge. This may seem tricky if your hat is small--just keep pulling the seam out straight in front of the presser foot, sewing a short distance at a time.


5. You're finished! You shouldn't even need to clip the curves on a this stretchy knit. Turn the hat right side out, turn up the brim, put it on your doll!

More about the Santa Dolly project later.

Thursday, September 17, 2009

Basic Sewing Tool Kit



Do you know a tool lover? If so, you've heard about the importance of having the right tool for the job. This applies not only for woodworking, mechanical, or household projects! I'm thinking about sewing tools--sewing can be just as important to the household economy as any handyman or yard work project. We're not just talking hobby here! Mending, alterations, making gifts, home decor, and so on can be a great savings on the budget. We need the right tools for the job! Here's my current list of essential sewing tools. These are only the basics--first we need the essentials.

FOR MEASURING:

-Seam Gauge
-Measuring Tape
-Yardstick

FOR CUTTING:

-Shears (with bent handles)--for cutting fabric ONLY.
-Scissors--small and sharp pointed for snipping and trimming.

FOR MARKING:

-Disappearing Marking Pen or Marking Pencil (I mostly use pins.)
-Marking Wheel and Paper

FOR THREADING CASINGS:

-Bodkin (a must, from the notions section--grips ribbon or elastic to pull through casing.)
-Safety Pin (pin to ribbon or elastic and pull through casing.)
-Hairpin (Cut small slit in ribbon or elastic, thread hairpin through, and pull through
casing.)

FOR ACCURATE SEAMS:

-Post-it Notes, Rubber Band (place on bed of machine where edge of fabric should run.)

FOR PRESSING:

-Iron
-
Ironing Board (a GOOD iron makes sewing easier.)
-Press Cloth
-Spray Bottle
-Smaller Pressing Surface such as a sleeve board or table-top pressing board.

FOR SEWING MACHINE MAINTENANCE:

-Machine Oil--regularly clean and oil your machine! Check your manual.
-Small Screwdriver
-Small Brush


GENERAL TOOLS

-Pins (I like long pins with round heads--get good ones!)
-Pincushion
-Needles, Hand and Machine (Change your machine needle often! Have a selection of
sizes on hand.)
-Seam Ripper
-Stiletto, Ice Pick, or another sharp pointed instrument for guiding fabric under presser
foot.
-Fray Check (A must! Stabilizes frayed edges, ends of seams, and any number of other
uses.)
-Bone Folder--from the Paper Craft section of the craft store. Marks fabric with a crease,
turns out points, useful for finger pressing.
-Chop Stick--for turning points.

These are the basics--now starts the fun: pinking shears, rotary cutter and mats, cutting rulers. . . arrange the workbench!